|
|
Colour de Verre and Other Casting MouldsWe are pleased to now be able to stock elements of the Colour de Verre range of reusable moulds for glass casting. Given the level of interest in these products, we are continuing to expand our range. Should you be interested in a particular mould which we currently don't have, please give us a call and we'll endeavour to add it to our next shipment. The Colour de Verre company was established a few years ago, being cofounded by Craig Smith (President), Lawrence Jacobsen and Jane Persico. The founders based their new product line on innovation, superior design and craftsmanship. Since then Colour de Verre has grown rapidly by incorporating the skills and talents of other artists and craftspeople. The Colour de Verre website (click here to access their website) provides a host of project ideas and an extensive photo gallery relating to the use of their products. Colour de Verre prides itself that its moulds are made in small art potteries in Portland, Oregon, rather than being mass-produced in large offshore factories. IT SHOULD BE NOTED THAT FOR BEST EFFECT, COLOUR DE VERRE SPECIFICALLY RECOMMENDS THE USE OF HOTLINE PRIMO PRIMER (OR MR-97). We do not stock aerosol Boron Nitride products (MR-97) as they cannot be posted (dangerous goods). Colour de Verre recommends that you give the mould 3-4 thin, even coats of Primo Primer kiln wash, using a soft artist's brush to apply the Primer. They recommend that you do NOT use a haik brush, as this will not pick up the necessary fine detail. Use a hair dryer to completely dry each coat before applying the next. There is no need to pre-fire the kiln wash. Once it is dry, the mould is ready to fill. |
Search the websiteYour Cart
|
||||||||||||||||||||||||||||||||||||||||||||||
|
All content is copyright Divine Glass Design 2010 shopping cart by aus-e |
||||||||||||||||||||||||||||||||||||||||||||||||