Earthenware ceramic tiles work well to texture glass in a kiln. Generally, any fusible piece of glass can be heated and textured on a texture tile. Once textured, the glass can be slumped to create lovely vessels or displayed flat as panels or sun catchers. With the use of a common slumping firing schedule and most slump moulds, the texture will remain intact.
The basic procedure for the use of these textured tiles and design tiles is as follows:
Apply a quality glass separator to the tile according to the manufacturer’s instructions. If using a water-based glass separator, the water must be completely driven from the ceramic tile before use with glass. Take care not to choose a glass separator that is excessively thick as the separator can fill in too much detail. The manufacturer of these tiles recommends the use of Primo Primer.
To achieve maximum texture on glass, fuse to a full fuse on the tile.
For an eye-catching effect, fuse iridised glass iridised side down on the textured tile.
This earthenware tile measures approximately 18 cm x 33.6 cm (7 1/8" x 13 1/4") and features a Fleur-de-Lis design, which covers the whole tile.
Oceanside Discontinued Glasses
System 96 Glass
Fusing Supplies
All Products ...