This Colour de Verre single mould forms three different blossoms: the Anemone, Dogwood, and Trillium (a spring perennial, native to North America). These blossoms are perfect for jewellery and work well with their larger Colour de Verre counterparts.
The Anemone has a fill weight of 45 grams, the Dogwood 33 grams, and the Trillium 33 grams - this is the amount of glass required to fill the mould properly.
For best effect, Colour de Verre recommends the use of frit, at least 50% of which should be clear (otherwise the castings will be very dark). To see our range of fine frits,
click here. IT SHOULD BE NOTED THAT FOR BEST EFFECT, COLOUR DE VERRE SPECIFICALLY RECOMMENDS THE USE OF HOTLINE PRIMO PRIMER (OR MR-97, WHICH IS NOT CURRENTLY AVAILABLE IN AUSTRALIA).
Give the mould 3-4 thin, even coats of Primo Primer kiln wash, using a soft artist's brush to apply the Primer (Colour de Verre recommends that you do NOT use a haik brush, as this will not pick up the necessary fine detail). Use a hair dryer to completely dry each coat before applying the next.
Oceanside Discontinued Glasses
System 96 Glass
Casting Supplies
All Products ...