This single mould forms two bloom sizes: a large and a medium anemone. If you need a small anemone, one can be found in the Colour de Verre Small Mixed Flowers #2 mould.
The finished pieces can be fused to plates and platters, made into drawer pulls, or jewellery.
The fill weights are 75 and 50 grams respectively. The dimensions of the anemones are approximately 7.6 cm and 4.2 cm respectively. The mould itself measures 21.5 cm x 11.5 cm x 4 cm approximately.
For best effect, Colour de Verre recommends the use of frit, at least 50% of which should be clear (otherwise the castings will be very dark).
IT SHOULD BE NOTED THAT FOR BEST EFFECT, COLOUR DE VERRE SPECIFICALLY RECOMMENDS THE USE OF HOTLINE PRIMO PRIMER (OR MR-97, WHICH IS NOT CURRENTLY AVAILABLE IN AUSTRALIA).
Give the mould 3-4 thin, even coats of Primo Primer kiln wash, using a soft artist's brush to apply the Primer (Colour de Verre recommends that you do NOT use a haik brush, as this will not pick up the necessary fine detail). Use a hair dryer to completely dry each coat before applying the next.
Oceanside Discontinued Glasses
System 96 Glass
Casting Supplies
All Products ...