SA2 - 45cm x 45cm cm internal size - 10A 240V

We are working on automating the kiln shipping cost calculations, but it isn't going well. Estimated shipping prices are around $80 to Brisbane and Melbourne, $120 to Perth and Darwin. Please choose studio pickup and bank deposit to purchase and we will email through a full invoice (payable through bank deposit or paypal) including shipping.

To calculate the worst case scenario for shipping costs please visit e-go.com.au and in the big orange box select From: "our depot" - and choose Fyshwick ACT. To: "our depot" and choose the closest depot to you. Due to difficulties with shipping to the door we highly recommend Depot shipping only - which is also approximately 15% cheaper.

The shipping dimensions of this kiln are 68cm x 80cm x 50cm and the weight is 65kg.

Actual shipping costs will be cheaper - we get a discount which we pass on to you.

Based on the incredibly popular and successful DIY kiln range that we have been making for over a decade - we are introducing a range of ready to use kilns.

Substantial improvements have been made over the original DIY kilns, from the availability of state of the art controller options through to custom made handles and hinges - each component of these new kilns has been carefully selected or created to ensure these are among the best glass kilns available anywhere in the world.



These new kilns are smaller in external size without compromising the level of insulation thanks to new materials and a more efficient design process.

Internal sizing was chosen to enable the use of the most common shelf sizes - this kiln can comfortably handle a 40cm x 40cm shelf.



All materials possible are grown, produced or manufactured in Australia. Only the controller box contains foreign sourced products.

Certified, responsibly sourced, Australian timber is used for all handles.

We are offering a choice of an economical 3-key controller, or a Genesis Mini controller with a Solid State Relay for near silent operation.

4 rows of elements in each kiln provide excellent thermal coverage to ensure even heat distribution - while providing extra heat from the top of the kiln to give fired glasses the best possible finish.



We have tested these new kiln designs for over a year, and have had them in testing studios around the country for the past six months to get feedback on their performance before bringing them to market.

We are providing a world leading warranty for all kilns of 5 years for all non consumable parts (elements and relays). As an Australian company we comply fully with our requirements under the ACL in addition to our standard warranty.

Key features:

Incredibly energy efficient.

Operates on a standard household 10 amp power point - 240V AC 10 amps.

Designed temperature range 650° ~ 850 °C – maximum temperature of 1050°C. All refractories are rated to at least 1100°C.

Fully enclosed in a solid stainless steel box for incredible strength - We chose 1.6mm thick stainless for all of the kilns to ensure that they are as strong as possible.

Multiple layer insulation reduces firing costs (equivalent to 15cm of fire brick) compared with most designs at 7.5cm.

Rectangular interior.

Fully complies with Australian Safety standards, and is certified to display the Regulatory Compliance Mark.

Integrated lid safety switch.



Both controller options include a safety relay to prevent thermal runaway.

Both controller options are actively cooled to extend the life of electrical components.

This is V2 of the design - but the changes were mainly to reduce shipping damage possibilities and to make assembly easier. The lid fibre is now fully supported on all edges.